5. Auto-Stop Function

• Make sure to inspect the function every time the diaphragm/valve assembly is replaced. Remove the auto-stop piece and put in the plug to ensure the auto-stop function works properly. After checking, disconnect the plug from the power point and set the auto-stop piece in the right position. (See below.)

WARNING

• Be sure to turn off the power when replacing the diaphragm/valve assembly and/or handling the auto-stop piece. Failing to do so may cause an electric shock.

 

How to remove the auto-stop piece

1. Normal position.

   

2. Turn the auto-stop piece and align the ▲ symbol with the slit.

   

3. Remove the auto-stop piece from the air pump auto-stop holder.

   

How to set the auto-stop piece

1. Align the ▲ symbol from the auto-stop piece toward the ▲ symbol on the auto-stop holder and slide the piece into the holder.

   

2. Push it in until it clicks.

   

3. The auto-stop is now ready for use.